Trend Back Pack Tool Bag  

Trend Back Pack Tool Bag

Multiple storage pockets, pouches and zipped compartments to keep a full kit of tools safely stowed when transporting to and from the jobsite along, with easy access when required Lightweight, flexible and hardwearing 600 denier weather resistant po...

  £70.95
More Information »
Trend Ball Groover 1/2" Shank Router Cutter 12.7mm  

Trend Ball Groover 1/2" Shank Router Cutter 12.7mm

Ideal for hiding pipes and cables. Part of curve can be used for producing decorative edges. An initial slot is required before using the ball groovers. Specifications • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia2 Metric: 6.5 &b...

  £63.95
More Information »
Trend Beam Trammel Rod 10mm  

Trend Beam Trammel Rod 10mm

Can be used with a majority of routers on the market. The bar fits into one of the the holes for the router side fence. They have a pivot point which is adjustable in height....

  £44.95
More Information »
Trend Beam Trammel Rod 8mm  

Trend Beam Trammel Rod 8mm

Can be used with a majority of routers on the market. The bar fits into one of the holes for the router side fence. They have a pivot point which is adjustable in height....

  £30.95
More Information »
Trend BEAM/005 Beam Trammel Point Attachment  

Trend BEAM/005 Beam Trammel Point Attachment

The point attaches to one of the router fixed rods. The pivot point is adjustable in height and this trammel can be used on most 8mm rods. For 8 mm diameter fence rods....

  £13.95
More Information »
Trend Bearing Guided Architrave Router Cutter 40mm 29.5mm 8mm  

Trend Bearing Guided Architrave Router Cutter 40mm 29.5mm 8mm

Self guided for modern architrave & skirting. Specifications • Shank Diameter: 8 mm • Dia Metric: 40 • Cut Length Metric: 29.5 • Overall Length Metric: 74.3 • Bearing Dia Metric: 9.5 • Radius 1 Metric: 9 • Angle: 7...

  £79.95
More Information »
Trend Bearing Guided Bevel Chamfer Router Cutter 41mm 13mm 1/2"  

Trend Bearing Guided Bevel Chamfer Router Cutter 41mm 13mm 1/2"

Larger bearing removes the flat. Supplied with two bearings. Specifications • Shank Diameter: 1/2 • Dia Metric: 41 • Cut Length Metric: 13 • Overall Length Metric: 62 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial:...

  £76.95
More Information »
Trend Bearing Guided Bevel Trimmer Router Cutter 20mm 14mm 1/4"  

Trend Bearing Guided Bevel Trimmer Router Cutter 20mm 14mm 1/4"

Cut a wider edge line, at an angle of 80 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting edges. Specifications • Shank Diameter: 1/4 • Dia Metric: 20 • Cut Length Metric: ...

  £59.95
More Information »
Trend Bearing Guided Bevel Trimmer Router Cutter 27mm 9mm 1/4"  

Trend Bearing Guided Bevel Trimmer Router Cutter 27mm 9mm 1/4"

Cut a wider edge line, at an angle of 45 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting edges. Specifications • Shank Diameter: 1/4 • Dia Metric: 27 • Cut Length Metric: 9...

  £61.95
More Information »
Trend Bearing Guided Biscuit Jointer Set 40mm 4mm 1/2"  

Trend Bearing Guided Biscuit Jointer Set 40mm 4mm 1/2"

For biscuit jointing of timber, man-made fibre and particle board with the router. The set includes three sizes of bearing which set the correct depth of cut for the three sizes available. A slightly longer cut than the length of the biscuit is re...

  £82.95
More Information »
Trend Bearing Guided Biscuit Jointer Set 40mm 4mm 1/4"  

Trend Bearing Guided Biscuit Jointer Set 40mm 4mm 1/4"

For biscuit jointing of timber, man-made fibre and particle board with the router. The set includes three sizes of bearing which set the correct depth of cut for the three sizes available. A slightly longer cut than the length of the biscuit is re...

  £82.95
More Information »
Trend Bearing Guided Biscuit Jointer Set 40mm 4mm 8mm  

Trend Bearing Guided Biscuit Jointer Set 40mm 4mm 8mm

For biscuit jointing of timber, man-made fibre and particle board with the router. The set includes three sizes of bearing which set the correct depth of cut for the three sizes available. A slightly longer cut than the length of the biscuit is re...

  £82.95
More Information »
Trend Bearing Guided Decorative Bead Router Cutter 35mm 38mm 1/2"  

Trend Bearing Guided Decorative Bead Router Cutter 35mm 38mm 1/2"

For architraves, framing as well as edge moulding. Specifications • Shank Diameter: 1/2 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Dia2 Metric: 26 • Cut Length Metric: 38 • Overall Length Metric: 87 • Bearing Dia Met...

  £107.95
More Information »
Trend Bearing Guided Door Leading Edge Undercut Router Cutter 92 Degrees 50mm 1/2"  

Trend Bearing Guided Door Leading Edge Undercut Router Cutter 92 Degrees 50mm 1/2"

2 degree undercut router bits for routing a leading edge on doors to allow a tight fit against jamb. Shank mounted bearing self guides the cutter along door edge. Specifications • Shank Diameter: 1/2 • Dia Metric: 22.5 • Cut Length M...

  £94.95
More Information »
Trend Bearing Guided Door Leading Edge Undercut Router Cutter 93 Degrees 38.1mm 8mm  

Trend Bearing Guided Door Leading Edge Undercut Router Cutter 93 Degrees 38.1mm 8mm

3 degree undercut router bits for routing a leading edge on doors to allow a tight fit against jamb. Shank mounted bearing self guides the cutter along door edge. 8mm shank for medium or heavy duty routers only. Specifications • Shank Diamet...

  £62.95
More Information »
Trend Bearing Guided Door Leading Edge Undercut Router Cutter 93 Degrees 50mm 1/2"  

Trend Bearing Guided Door Leading Edge Undercut Router Cutter 93 Degrees 50mm 1/2"

3 degree undercut router bits for routing a leading edge on doors to allow a tight fit against jamb. Shank mounted bearing self guides the cutter along door edge. Specifications • Shank Diameter: 1/2 • Dia Metric: 24.3 • Cut Length ...

  £98.95
More Information »
Trend Bearing Guided Door Leading Edge Undercut Router Cutter 93 Degrees 50mm 12mm  

Trend Bearing Guided Door Leading Edge Undercut Router Cutter 93 Degrees 50mm 12mm

3 degree undercut router bits for routing a leading edge on doors to allow a tight fit against jamb. Shank mounted bearing self guides the cutter along door edge. Specifications • Shank Diameter: 12 mm • Dia Metric: 24.3 • Cut Lengt...

  £98.95
More Information »
Trend Bearing Guided Double Trim Router Cutter 18mm 15mm 1/4"  

Trend Bearing Guided Double Trim Router Cutter 18mm 15mm 1/4"

Trimming top and bottom surfaces simultaneously with bearing following the board. Two fluted. Increased productivity. Specifications • Shank Diameter: 1/4 • Dia Metric: 18 • Cut Length Metric: 15 • Overall Length Metric: 65...

  £84.95
More Information »
Trend Bearing Guided Dual Bead Router Cutter 22mm 19mm 1/4"  

Trend Bearing Guided Dual Bead Router Cutter 22mm 19mm 1/4"

Can be used to make single, double or corner beads. Specifications • Shank Diameter: 1/4 • Dia Metric: 22 • Cut Length Metric: 19 • Overall Length Metric: 59.3 • Bearing Dia Metric: 16 • Radius 1 Metric: 3...

  £80.95
More Information »
Trend Bearing Guided Finger Jointer Set 40mm 1/2"  

Trend Bearing Guided Finger Jointer Set 40mm 1/2"

Finger Jointer combines an assembley of five TCT slotting cutters with an abutting-edge cutter to produce a profile that extends the glue line threefold, resulting in an extremely strong joint. The Finger Jointer fits into any portable or stationar...

  £133.95
More Information »

Brands

Categories

Merchants

Discounts

Voucher Codes